Roofing harness – Take safety equipment allows you to work on your home roof while reducing your risk of injury. Two-story houses or those with a steep roof pitch are particularly risky, but even low-pitch, one-story home pose a declining. Falling out of a roof can result in serious injury or death. A seat belt can safely work on roof. Install anchors to top of roof at intervals of 8 to 10 feet long, with end anchors at least 6 feet from ends of roof. Screw anchors in rafters in roof according to manufacturer’s instructions.
Inspect seat belt to ensure that it is in order. Look for any fraying or damaged greatly. Remove roofing harness, make sure straps lie flat against your body. Connect all buckles and adjust straps so that harness fits your body. Place safety rope to anchor you placed at top of roof. Choosing anchor that is closest to area where you want to work.
Then, connect other end of safety rope to your roofing harness. Be aware of location of your safety rope so you do not trip or slip on it. When you move to about 4 or 5 feet in both directions of anchor you are attached, it is time to switch to next anchor. Make your way back to top and move safety rope attachment to next anchor